推薦產品

DHB-3000A型 全電子布氏硬度計【小屏顯】 布氏硬度計

HC010-HCDHB-3000A型全電子布氏硬度計【小屏顯】

HC010-HCDHB-3000A-type all-electronic Brinell hardness [small screen]

產品簡介/ Product introduction：

HC010-HCDHB-3000A電子布氏硬度計(全電子布氏)具備了10級試驗力,可分別測試布氏硬度的10種標尺.閉環式傳感器加載控制系統,高精度、高重復性和穩定性.操作簡便。

HC010-HCDHB-3000AElectronicBrinell hardness(fully electronicBrinell)has the10test force,respectivelyBrinell hardnesstestof10 kinds ofscales.Closed loopsensorloadcontrol system,high accuracy, highrepeatability and stabilityoperationis simple.

適用范圍/ Scope of application：

電子布氏硬度計采用的試驗力大,壓痕直經也大,適合具有大晶粒金屬材料的硬度測試,如鑄鐵,有色金屬及合金,各種退火、調質處理后的鋼材,特別是對于較軟的金屬,如純鋁、鉛、錫等黑色金屬,有色金屬的布氏硬度測試.

ElectronicBrinell hardnesstest forceused bylargeindentation islarge,suitable for people witha large grainof hardnesstestingof metallic materials,such as cast iron, nonferrous metalsand alloys,variousannealedsteelafterquenching, especiallyfor thesoftermetals such asaluminum, lead,tin and otherferrous metals,nonferrous metalsBrinellhardness test.

工作環境/ Work environment：

1、在室溫10~35℃的范圍內；

2、在穩固的基礎上水平安裝；

3、在無震動的環境中；

4、周圍無腐蝕性介質；

5、室內相對濕度不大于65%；

1, in the range of room temperature 10~35℃;

2, in a stable foundation for horizontal installation;

3, in the absence of vibration environment;

4,Non corrosive medium, around;

5, the indoor relative humidity of not more than 65%;

獨有優點/ Unique Advantages：

1. 最新的C++語言編制程序+高精度壓力傳感器+CPU全閉環控制系統，確保優良的力值精確性和視值穩定性；
2. 大幅度提高硬件在運行中的可靠性和穩定性；
3. 動態力值波動小于1000/1(其他其生產企業1000/5）；
4. 確保力值更精確，示值更穩定；
5. 殼體做過時效處理；
6. 具有良好的可操作性和人性化；
7. 布氏試驗力：十級
8. 動態顯示試驗力加載、卸載的全過程；

1The latestC + +programminglanguageprecision pressuresensor+ CPU+closed loopcontrol system to ensureaccuracy andexcellentvalueas thevalue ofthe forcestability;
2 significantly improve the reliability and stability of the hardware in the running;
3 fluctuations in the value of the dynamic force of less than 1000/1 (the other production companies 1000/5);
4 to ensure a more accurate force values????, showing the value of a more stable;
5 casing done aging treatment;
6 has good maneuverability and humane;
7 Brinell test force: ten

8dynamic displaytest forceloading, unloadingof the entire process;

技術指標/Technical Index：

1.試驗力:612.9N(62.5kg)、980.7N(100kg)、1226N(125kg)、1839N(187.5kg)、2452N(250kg)、4903N(500kg)、7355N(750kg)、9807N(1000kg)、14710N(1500kg)、29420N(3000kg)
2.壓頭規格：
2.1 φ2.5mm球壓頭
2.2 φ5mm球壓頭
2.3 φ10mm球壓頭
3.測量顯微鏡放大倍率:20X
4.測微轂輪最小讀數:0.005mm
5.被測試件允許最大高度:225mm
6.壓頭中心到機身距離:135mm
7.延時控制:5~60秒可調
8.電源電壓:AC220V±5%,50~60Hz
9.硬度計外形尺寸(長×寬×高) 789×543×225 (mm)
10.儀器重量約:130kg
11.試驗力的選擇應使壓痕直徑(d)與球直徑(D)保持0.25D＜d＜0.6D的關系.
12.硬度測試范圍:8～650HBW

13.試驗力加載：全自動

1 Atest force:. 612.9N (62.5kg), 980.7N (100kg), 1226N (125kg), 1839N (187.5kg), 2452N (250kg), 4903N (500kg), 7355N (750kg), 9807N (1000kg), 14710N(1500kg), 29420N (3000kg)
2headSpecifications:
2.1 φ2.5mmball indenter
2.2 φ5mmball indenter
2.3 φ10mmball indenter
3Measuring Microscopemagnification: 20X
4micrometerHubMinimum reading: 0.005mm
5were allowed totest themaximum height: 225mm
6indentercenter to the fuselage: 135mm
7Delay Control:adjustablefrom 5 to60 seconds
8Power supply voltage:. AC220V ± 5%, 50 ~ 60Hz
9Hardness Dimensions(L × W× H) 789 × 543 × 225 (mm)
10Instrumentweight about: 130kg
11Select thetest forceshallmakeindentation diameter(d)maintaining0.25D <d <0.6Drelationship with theball diameter(D).
12Hardnesstest range:. 8 ~ 650HBW
13testforce loading: Automatic

標準配置/ Standard configuration：

1.主機
2.20×讀數顯微鏡1只
3.φ2.5mm球壓頭1只
4.φ5mm球壓頭1只
5.φ10mm球壓頭1只
6.小平面試臺1只
7.大平面試臺1只
8.標準布氏硬度塊
HBW/3000/10 1塊
HBW/750/5 1塊
9.保險絲2只
10.電源線1根
11.產品合格證書1份
12.產品使用說明書1本
13.布氏硬度對照表1本

14.防塵罩1只

選配附件/ Optional accessories:
壓頭、硬度塊

客戶名錄：

詳見公司客戶名錄

、、、、、、

質量保證：

本公司保證交付的硬度計執行標準:金屬布氏硬度實驗GB/T 231-2002國家標準、JJG_150-2005布氏硬度計檢定規程，參照ISO 6506：2005國際標準。精度達到合同要求。生產研發過程嚴格執行ISO9001:2000質量管理體系.

We guaranteedeliveryofStandardHardness:Brinellhardness testGB / T 231-2002national standards, JJG_150-2005Brinell hardnesstest procedures,referring toISO 6506:2005international standard.Accuracyrequirements of the contract.Production and developmentprocess strictlyimplement ISO9001: 2000quality management system.