推薦產品

HRSS-150型 數顯洛氏表面洛氏硬度計(全洛氏) 硬度計

HRSS-150型數顯洛氏表面洛氏硬度計(全洛氏)

HRSS-150 Digital Display Rockwell Superficial Rockwell hardness (full Rockwell)

產品簡介/ Product introduction：

HRSS-150型數顯洛氏表面洛氏硬度計(全洛氏)是國內首創集洛氏硬度和表面洛氏硬度于一體的新型硬度計，獨特的結構設計和微處理系統，使該機技術性能達到國際水平。其初試驗力和總試驗力可同步切換，力值的精確，極高的測量精度、示值重復性好。

HRSS-150型數顯洛氏表面洛氏硬度計采用5.2寸大屏幕液晶顯示、操作便捷、外形新穎、功能齊全、操作方便顯示清晰直觀、性能穩定，是集機電于一體傳感器閉環系統的高新技術產品，可進行洛氏、表面洛氏全部標尺的硬度測試。并可進行標尺選擇，壓頭匹配提示，各種硬度值對照；保持時間增減；照明和屏幕亮度調整；示值數據存、取、打印處理等各項完備的功能。還配備有RS-232接口可與計算機聯動工作。是科研、實驗室及各類制造業洛氏硬度測試?yán)硐氲倪x擇。

本硬度計，由于內設電腦微型程序裝置，可自動控制測試周期。這個裝置不僅進行上述測試周期控制和測量，而且還進行一系列輔助功能，其中包括數學（即統計）和信息技術（與周邊設備界面連接）功能，還有一些技術功能，如可將所取得的硬度值換算成相應的不同硬度標準的值，或轉換成最后的拉力。這些功能使此硬度計成為一臺完整的多功能器件。同時由于使用容易理解和設置菜單，仍保持著一定程度的操作簡便特性。

HRSS-150型數顯洛氏表面洛氏硬度計適用于硬質合金，碳化物；表面淬火鋼，硬化薄板，淬鋼，調質鋼，冷硬鑄鐵，鑄鐵，鋁，銅，鎂等合金鋼。

HRSS-150 Digital Display Rockwell Superficial Rockwell hardness (full Rockwell) is the first set of Rockwell and Superficial Rockwell hardness tester in one of the new, unique structural design and micro-processing system, so that the technical performance reached the international level. Its initial test force and total test force can be synchronized switching, the exact value of the force, high measurement accuracy, showing good reproducibility.

HC010-HRSS-150 Digital Display Rockwell Superficial Rockwell hardness tester uses 5.2-inch large-screen LCD, easy operation, novel, fully functional, easy to operate display is clear and intuitive, stable performance, is set in one of electromechanical sensor closed loop system high-tech products, can be Rockwell, Superficial Rockwell hardness testing of all scales. Ruler can be selected to match the indenter tips, a variety of hardness control; hold time of change; illumination and screen brightness adjustment; showing the value of the data stored, take, the complete function print processing. Also equipped with RS-232 interface can be linked to work with computers. Scientific research, laboratory and manufacturing all kinds of Rockwell hardness testing the ideal choice.

The hardness, due to the micro-site computer program device can be automatically controlled test cycle. This device is not only the above test cycle control and measurement, but also a series of auxiliary functions, including mathematics (ie statistics) and information technology (connected peripherals interface) functions, there are some technical features, such as can be achieved hardness values ??converted to the corresponding values ??of different hardness standards, or converted into the final tension. These features make this hardness to become a complete multi-function devices. At the same time the use of easy to understand and set menus, still maintains a certain degree of easy operation features.

HC010-HRSS-150 Digital Display Rockwell Superficial Rockwell hardness tester for carbide, carbide; surface hardening steel, hardened sheet, quenched steel, quenched and tempered steel, chilled cast iron, cast iron, aluminum, copper, magnesium, etc. alloy steel.

適用范圍/ Scope of application：

洛氏硬度計適用于黑色金屬、有色金屬和非金屬材料的硬度測定。

適用范圍:淬火、表面淬火鋼,調質、退火鋼,冷硬鑄件,可鍛鑄件,硬質合金鋼,鋁合金,軸承鋼,硬化薄鋼板等。

Rockwell hardness meter is suitable for measuring the hardness of ferrous metal, nonferrous metal and nonmetal materials.

Scope of application: Hardened and surface hardened steel, quenching and tempering, annealing of steel, chilled casting, malleable cast iron, hard alloy steel, aluminum alloy, bearing steel, hardened steel sheet etc..

工作環境/ Work environment：

1、在室溫10~35℃的范圍內；

2、在穩固的基礎上水平安裝；

3、在無震動的環境中；

4、周?chē)鸁o(wú)腐蝕性介質；

5、室內相對濕度不大于65%；

1, in the range of room temperature 10~35℃;

2, in a stable foundation for horizontal installation;

3, in the absence of vibration environment;

4,Non corrosive medium, around;

5, the indoor relative humidity of not more than 65%;

工作原理/ Working principle：

洛氏硬度的試驗原理：用金剛石圓錐體壓頭或一定直徑的鋼球壓頭，在初試驗力F0和主試驗力F1先后作用下，壓入試樣表面，保持一定時間，卸除主試驗力，保留初試驗力，此時的壓入深度為h1，在初試驗力作用下的壓入深度為h0，它們之差e(h1—h0)來表示壓痕深度的永久增量。每壓入0.002mm為一個洛氏硬度單位。（圖1）

洛氏硬度的計算公式：HRA、C=100—(e/0.002)

HRB=130—(e/0.002)

The test principle of Rockwell hardness: Ball indenter or certain diameter diamond cone pressure head, in the initial test force F0 and the main test force under the action of F1 successively, pressed into the surface of the sample, keep a certain time, removable main test force, retain the initial test force, indentation depth of the H1, in the initial check depth of press force is H0, and the difference between them (e H1 H0) to represent the permanent incremental indentation depth. Each press 0.002mm as a Rockwell hardness unit. (Figure 1)

The calculation formula of Rockwell hardness:

HRA, C=100 (e/0.002)

HRB=130 (e/0.002)

性能特點/ Features：

1、洛氏、表面洛氏硬度標尺的選用；共有18種標尺供選擇，試驗力自動選擇。

2、硬度測試保持時間的選擇；

3、復位、刪除功能；

4、瀏覽硬度測試的示值；最多顯示24次測量記錄；

5、硬度測試結果的數據處理，并打印輸出；

6、各類硬度示值之間的對照；自動換算

7、RS-232C串行通訊，供用戶擴展功能

8、5.2寸大屏幕顯示

1, Rockwell, Superficial Rockwell hardness scale selection; There are 18 kinds of scales are available, the test force is automatically selected.

2, hardness testing time keeping choice;

3, reset, delete function;

4, showing the value of browsing hardness testing; Up Show 24 measurement records;

5, the hardness test results of data processing and print output;

6 shows the comparison between the values ??of various types of hardness; automatically translated

7, RS-232C serial communication for users to extend the functionality

8,5.2 inch large screen display

l 結構性能：儀器有一個支撐結構，可確保廣闊的操作空間面積（有用高度約300㎜，深度達200多㎜），配以良好的穩固性。這樣結構，使工作區的幅度和可視度等操作要求，結合使用簡便和靈活，有效地滿足在不同條件下進行高精確的計量需求。

l structural performance:the instrument hasasupport structurethat ensuresbroadoperating spacearea(useful toa height of about300mm,a depth ofmore than 200mm),withgoodstability.Thisstructure, thevisibility ofsuchmagnitude andthe operational requirementsofthe work areausing a combination ofsimplicity andflexibilityto effectivelymeetthe demandfor high-precisemeasurementunder different conditions.

l 計量性能：除了上面提到的穩固性之外，我們還特別關注分辨率和測量重復性。在生產各環節都不斷進行監控，這樣保證了生產線上產出的儀器具有良好恒定的操作性能。

l MeasurementPerformance:In addition tothe above-mentionedstability,we arealso particularly concerned aboutthe resolution andmeasurement repeatability.Inall sectors of productionareconstantlymonitored,so thatthe output ofthe production lineto ensure theinstrument hasgoodconstant operatingperformance.

l 人文工效特性：盡管本儀器功能多種多樣，儀器和操作者之間的互助關系得到改善，在使用簡便和多功能之間取得最佳平衡，從而使操作機器成為一種愉快。

l Humanitiesergonomicscharacteristics: Although thisinstrumentfeaturesa wide variety, mutualrelationsbetween theinstruments andthe operatorimprovedto achieve the bestbalance betweenease of useand versatility, allowingoperation of the machinebecomes apleasure.

l 多功能與信息處理系統完美結合，只舉幾個例子如下：

l versatileandthe perfect combination ofan information processingsystem,onlya few examplesare as follows:

ü 儀器可以同時連接一個打印機打出結果，連接一個PC當場處理信息，也可連接一個主機控制生產周期；

ü instruments canplaysimultaneously connectaprinterresults,connect aPCon the spotto process information, can also beconnected toahost computerto controlthe production cycle;

ü 也可以將測量結果輸?shù)揭粋�(gè)PC機里，將這樣的數據直接引入一般目的運用軟件（電腦傳真紙、數據庫、文字處理機）或?qū)ｉT(mén)為實驗室和示范室開發的軟件，而不必使用軟件開發器或信息技術其他解決方法，因?yàn)樘珡?fù)雜也不很可靠。

ü outputsthe measurement resultcan beaPC,wheresuch datais introduced directly intothegeneral purposeapplication software(PCfax paper, database,word processor)or asoftware specificallydevelopedfor thelaboratory anddemonstration room, without having tousesoftwaredevelopmentorotheriTsolutions,because it is toocomplexnot veryreliable.

l 安全性：硬度計盡管不是一臺很危險的儀器，但涉及安全性能時特別考慮到下列因素：良好的平衡性能使安裝起來較容易，一起牢固地固定在底座上使裝配既結實又穩定，網絡電壓只用于電源變壓器，這樣儀器任何一部分的電壓均不超過24V。

l Safety:Althoughhardnessis notavery dangerousinstrument, butparticularlyrelated tothe safety performance ofthe following considerations:a goodbalance of propertiesmakesit easierto install themtogetherfirmlyfixed to the baseassemblyso thatbothsolidand stable,the networkis used only forpower transformersvoltage, the voltageof anypart ofsuchinstrumentdoes not exceed24V.

技術指標/Technical Index：

1、洛氏硬度初試驗力：98.07N（10 kg）    

2、洛氏硬度總試驗力：588.4（60kg）、980.7（100kg）、1471N（150kg）

3、表面洛氏硬度初試驗力：29.4N（3 kg）  

4、表面洛氏硬度總試驗力：147.1（15kg）、294.2（30kg）、441.3N（45kg）

5、保荷時間：0~60秒 

6、試驗力加卸方式：自動

7、顯示方式：帶背光LCD屏、大屏幕液晶數顯

8、數據處理：CPU

9、被測試件允許最大高度：   180mm

10、壓頭中心到機壁最大距離：160mm

11、電源電壓：AC220V±5%；50HZ~ 60HZ

12、外形尺寸：230*930*615mm

13、凈重：110kg

14、使用環境：溫度：10-40℃；濕度：20-90%，不能冷凝。

1, the beginning of Rockwell hardness test force: 98.07N (10 kg)

2, Rockwell hardness test force: 588.4 (60kg), 980.7 (100kg), 1471N (150kg)

3, the surface Rockwell hardness test force early: 29.4N (3 kg)

4, the surface Rockwell hardness test force: 147.1 (15kg), 294.2 (30kg), 441.3N (45kg)

5, Dwell time: 0 to 60 seconds

6, the test force unloading mode: Auto

7, Display: Backlit LCD screen, large LCD digital display

8, the data processing: CPU

9, was allowed to test the maximum height: 180mm

10 the maximum distance to the center of the indenter machine wall: 160mm

11, supply voltage: AC220V ± 5%; 50HZ ~ 60HZ

12, Dimension: 230 * 930 * 615mm

13, Weight: 110kg

14, use of the environment: Temperature: 10-40 ℃; Humidity :20-90%, non-condensing.

標準配置/ Standard configuration：

客戶名錄：

詳見公司客戶名錄

、、、、、、

質量保證：

本公司保證交付的硬度計執行標準:金屬洛氏硬度實驗GB/T230-2002國家標準、JJG112-2003金屬洛氏硬度計檢定規程、JJG 152-1991金屬表面洛氏硬度計檢定規程，參照ISO6508-2:1999國際標準。精度達到合同要求。生產研發過程嚴格執行ISO9001:2000質量管理體系.

We guarantee delivery of performance standards hardness: Rockwell hardness test GB/T230-2002 metal national standards, JJG112-2003 Metal Rockwell hardness test procedures, JJG 152-1991 metal surface Rockwell hardness test procedures, referring to ISO6508-2:1999 international standards. Accuracy requirements of the contract. Production and development process strictly implement ISO9001: 2000 quality management system.